Saturday, July 28, 2007

Electrical Maintenance

If you have radio problems, the following checks and procedures may save you a pile of money and ease your frustrations.

· Alternator – The idle voltage should be higher than 12V (24V). Higher RPM should yield 14.27V (28.5V). Check with VOM at cigarette lighter if Bus Bar is not accessible.
· Check battery fluid levels once a month.
· Listen to radio for alternator whine while landing lights are on. Radio Squelch 'off' and squelch 'on'.
· Listen to radio for Magneto noise – You will hear a whine if shielding is poor. If a grinding sound is heard, the capacitor is shot.
· Check dimmer functions on lights and on radios (night).
· If ADF doesn’t point, check sense antenna. Check pins at the antenna connector. The female portion receptors sometimes get pushed back, something you can’t see.
· When connectors are removed, use a soft pink eraser to clean pins. Check the pins are parallel and not bent. Any green color indicates corrosion and ensures poor performance.
· Put vaseline on sides of radios so they slide in and out of racks more easily.
· If contact cleaner helps make a device work better, it is close to death already and should be replaced.
· Clean volume controls using contact cleaner (lighter fluid) and air pressure to blow clean.
· Every 500 hours or 2 years all screw contacts at switches, breakers and grounds should be tightened.
· Jacks – If the plug being wriggled in and out produces a crackling sound in the speakers, the jack is no longer good.
· No ground wire from a radio should be longer than 6”.
· The Transponder antenna coax should be no longer than 4 feet.
· All antennas should be clean and free of grime and paint.
· If the Transponder is using the wire type DME antenna, the wire must not be bent.
· If the coax cable is stiff, it should be replaced.
· If the Encoder appears not to be working, check to see if it feels warm after 10 minutes of operation. If cool, it is not working.
· Use NOALOX* on pins before installing connectors, using a small brush to apply.
· If copper-aluminum contact is made at some connector, use PENETROX E-13*.
· If copper-copper contact is made, use PENETROX A-13*. e.g. battery connectors and contactors.
· Obtain a can of BLOW-IT* air cleaner to blow out possible dust in connectors and sliding contacts.
· If you want to measure voltages in wires without undoing the connectors, get a ‘Pin Prick Probe’ for your VOM.
· If you have a radio problem, change earphones and push to talk switch first. Don’t plug into the intercom connectors but instead into the emergency connectors. They are direct to the radio.

Frank Hofmann, AME
Retired Professor of Aircraft maintenance

10 comments:

Anonymous said...

Useful tips for the beginners.

Anonymous said...

Hello to all, the contents existing at this site are actually amazing for people knowledge,
well, keep up the nice work fellows.

testostrong review

Anonymous said...

I delight in, result in I found exactly what I used to be taking a look for.
You've ended my 4 day lengthy hunt! God Bless you man. Have a great day. Bye

Here is my page ... bodybuilding workouts

Anonymous said...

Hi to all, because I am actually eager of reading this website's post to be updated regularly. It contains fastidious stuff.


payday loans

Anonymous said...

It's nearly impossible to find educated people in this particular subject, but you sound like you know what you're talking about!

Thanks

Feel free to surf to my site Green coffee diet

Anonymous said...

Hi there! Someone in my Myspace group shared this site with us so I came to look it
over. I'm definitely enjoying the information. I'm bookmarking and will be tweeting
this to my followers! Superb blog and fantastic design and style.


My web-site :: Muscle Gain Supplements

Anonymous said...

It is not my first time to visit this site, i am browsing this
website dailly and get pleasant facts from here every day.


Feel free to surf to my site ... Vimax Review

Anonymous said...

Good day! I know this is somewhat off topic but I was wondering which blog platform are
you using for this website? I'm getting tired of Wordpress because I've had problems with hackers and I'm looking at alternatives for another platform. I would be great if you could point me in the direction of a good platform.

Visit my weblog ... garcinia cambogia review

Anonymous said...

Hey! I just wanted to ask if you ever have any trouble with hackers?

My last blog (wordpress) was hacked and I ended up losing a few months
of hard work due to no back up. Do you have any
solutions to prevent hackers?

Have a look at my web blog - weight loss online

Anonymous said...

I always used to study post in news papers but now as I am a
user of internet so from now I am using net for posts,
thanks to web.

Here is my web site; Blast xl Male Enhancement